Material Discription:
| Material |
NBR(Nitrile Rubber/Buna-N) |
| Advantage |
1,Excellent Abrasion-Resistance,Good Rebound Resistance |
| 2,Good Tensile Strength and Elongation |
| 3,Excellent Animal and Vegetable Oil Resistance |
| 4,Good Oil and Fuel Resistance |
| 5,Good Water Resistance |
| Disadvantage |
1,Poor Oxygenated-Solvent Resistance |
| 2,Poor Ozone Resistance |
| Temperature |
-40ºC-120ºC, -50ºC-150ºC(special formula) |
| Application |
1,Fuel tank, lubricating oil tank and oil in the hydraulic oil, gas, water, silicone grease,
silicone oil and other fluid medium rubber parts, especially the sealing parts. |
| 2,It is currently the most widely used, the lowest cost of rubber seals. |
Advantages:
1. O-Ring offer an efficient and economical sealing element for a wide range of static or dynamic applications.
2. O-Ring sizes are defined by the inner diameter-ID and the cross section-CS, our o-ring Inner Diameter can be from 0.5mm to 1500mm.
3. Standard sizes such as AS568(PARKER sizes), JIS(P TYPE, G TYPE, S TYPE, V TYPE, F TYPE sizes), BS1516 sizes Metric sizes as well as non-standard sizes are all avaiblabe.
4. We have more than 4000 o-ring mould toolings, so you could get most sizes here without set-up or tooling charge. Huge inventory of o-rings can meet your urgent requiremnets.
5. A very wide range of elatomer material can be selected, main material: NBR(BUNA-N, Nitrile), VITON(FKM), Silicone(VMQ), HNBR, FFKM, EPDM, PU(Polyurethane, urethane), Fluorosilicone(FVMQ), Neoprene(CR) and so on. Hardness of material can be from 30 ShoreA(Durometer) to 90 ShoreA.
The O-RING KIT we can also supply as below:
DINGLI O-RING KIT (NBR)
GIANT O-RING KIT (NBR)
Updated version o-ring kit box for Caterpillar/Hitachi/Komatsu/Hyundai/Sumitomo/Doosan/Kobelco/Kato
VITON O-RING KIT (FKM)
Top Quality NBR O-Ring Kit for Caterpillar
Caterpillar D-RING KIT (NBR)
About us :
GDK seals company is professional seals manufacturer in Guangzhou China, and specialized in the seal kits of the excavator, breaker, loader, dozers, backhoes engineering industrial equipment for more than 12 years. Pursuing high quality and first-rate service are our goals.Looking forward to meeting you if you want to visit our factory in GUANGHZOU CHINA.
We set up the PTFE polymer materials, PU polyurethane and NBR materials seals producing line; Meanwhile, NOK, SKF, PARKER, CFW brand seals are also supplied well as the distributor in China. All sealing products are widely used in different kinds of excavator and breaker hammer installation and maintenance systems, wining high reputation from the customers at home and abroad.
Our factory : The products we can also supply as below:CONTAMI SEAL:KZT
PISTON PACKING
WEAR RING:Phenolic Resin WR,CAT type WR,PTFE RYT ect
DUST SEAL :DKB/DKBI,PAD, DSI, DLI/VAY, LBH etc
ROD PACKING
BUFFER RING:HBY,HBTS /HBTY(step seal)
BACKUP RING:BRT/BRTS/BRN,N4W,TFP/TFG
SEAL FOR CYLINDER-BOOM
SEAL FOR CYLINDER-ARM(STICK)
SEAL FOR CYLINDER-BUCKET
ROTARY JOINT SEALS
ROTARY(CONTROL) JOINT SEALS
ENGINE SEALS
HYDRAULIC PUMP SELAS
FRONT IDLER SEALS
CHAIN ADJUSTER SEALS
TRAVELLING MOTOR SEALS
CENTER JOINT SEALS/TURNING JOINT SEALS
SLEWING DEVICE SEALS /SWING MOTOR SEALS
LEVER CONTROL SEALS/ PILOT VALVE SEALS / PPC SEALS
TRANSMISSION SEAL KIT
ORING BOX / O RING KIT
HAMMER BREAKER SEAL KIT/BREAKER SEAL KIT
1.How to order ?
Pls contact me through email, Tel, skype or whatsapp,tell me what you need and I will offer according to your requirement .
After you confirm , I will send PI for payment .
2.How to produce ?
We can produce according to seal type and sizes .
If you need some customized parts, we can produce according to drawing and samples .
3. How to deliver ?
For small order, we will deliver by express, such as DHL, FEDEX, UPS,TNT.etc
For large order , we can deliver by air or by ship .
4. About payment ?
We accept : T/T, PAYPAL, WESTERN UNION or L/C
as usual , 30% advance payment in advance .
We can design and manufacture various rubber parts, custom-made is welcome
material: NBR, FKM, PTFE, silicon rubber are available.
size: hundreds
custom-made is welcome.
Welcome to contact anytime
| Meterial |
PTFE,NBR,PU, FKM ect |
| Hardness |
Shore 70-90 or according to order |
| MOQ |
100 PCS |
| Sample |
Free |
| Colors |
Black, brown, red, white, black, green, blue |
| Size |
OD can be 12mm to 2000 mm |
| Packing |
10 or 20 pcs/paper, then in carton |
| Production Time |
10-15 days |
| OEM |
Acceptable |
| Mold charge |
free |
Audited Supplier 
){kind=link}
){kind=link}